Knowledge Center
Selection · Guides · Insights
Practical, evergreen content on selecting, using, and applying construction-machinery IoT and rental management — from T-BOX selection to geofencing, risk-control lockout, and rental reconciliation.
Knowledge
How to Choose a Control System Supplier for Aerial Work Platforms
The real difference between control system suppliers for aerial work platforms is not the cabinet price but whether the technical agreement defines scope, interface ownership, acceptance criteria and revision terms. A four-part checklist for OEM buyers and control engineers.
Read more →Aerial Platform Battery Maintenance: What to Check
Battery condition decides whether an electric scissor lift goes out or stays parked. This guide covers winter checks, routine inspection intervals, charging habits and how telematics data reduces unnecessary site visits for rental fleets.
Read more →How Many Years to Pay Back a Scissor Lift Rental?
Scissor lift payback depends on purchase cost, annual rental income, maintenance, and resale value, not on rent alone. This guide sets out a payback and return framework, how falling rents change it, and where to source verifiable hour and utilisation data.
Read more →How to Choose a Telematics T-BOX Supplier for Construction Equipment
An equipment T-BOX supplier differs less in unit price than in whether CAN protocols can be integrated, how many relay channels are available, how positioning and connectivity hold up on site, and how volume delivery and certification are handled.
Read more →Equipment Utilization Rate: Why YoY and MoM Disagree
Utilization rate and average working hours measure different things, and year-over-year and month-over-month figures often point in opposite directions. This guide explains how to read monthly utilization data, why machine types diverge, and how a fleet builds its own metric from equipment hour data.
Read more →Excavator Inclinometer Placement: Body vs Arm
An excavator inclinometer measures two different things depending on where it is mounted. This guide covers body pitch and roll for tip-over protection, joint angles for grade control, and mounting choices across guidance, road maintenance, and open-pit mining.
Read more →Industry Knowledge
How to Choose a Fuel Consumption Sensor Supplier for Construction Equipment
Fuel sensor selection starts with the measurement route and the mounting method, not the quote. This guide compares inline volumetric and non-invasive ultrasonic options, and lists the quote breakdown, MOQ, lead time, and certifications to confirm before ordering.
Read more →How Can IoT Manage Parts, Repairs and Used Equipment in the Construction Machinery Aftermarket?
The construction machinery aftermarket has long suffered from opaque repair records, unmeasurable parts consumption and used-machine trades with no data to back them. This article covers the four classic aftermarket pain points and shows how the JGY IoT solution manages repairs, parts and used equipment through digital machine files, hour-based maintenance reminders and real operating data. Whether you rent, service or trade machines, here is how to turn the aftermarket from guesswork into data.
Read more →How Can IoT Support Emission Compliance Under the Non-Road GB4 (China Stage IV) Standard?
Since December 2022, China's Stage IV emission standard for non-road mobile machinery (GB4) has tightened limits and put runtime, fuel and machine-condition records at the center of compliance. This article explains what GB4 means for rental companies and contractors, and how the JGY T-BOX IoT terminal collects working hours, fuel and condition data to build an auditable environmental ledger that supports audit and traceability.
Read more →Tutorial
How to Manage Electric Aerial Platform Charging? An IoT Monitoring Guide
Electric aerial work platforms are taking over rental fleets, but charging management—where to install chargers, how to track battery levels, when to unplug, and how to schedule charging machines—remains a headache. This guide shows how IoT T-BOX units turn charging from guesswork into a transparent, data-driven operation.
Read more →How Do You Implement Predictive Maintenance for Construction Machinery? A Practical Guide to Condition-Data Alerts
Breakdowns always seem to happen right before a deadline. This article explains how to move from fix-it-when-it-breaks to predictive maintenance: collect oil pressure, temperature, engine speed, working hours and location, set threshold alarms and trend analysis, and walk through a workable configuration example on the JGY platform. For rental fleets and contractors, this turns unexpected downtime into planned, cheaper interventions.
Read more →How to Draw an Electronic Fence? Anti-Tamper and Anti-Breach Setup Tutorial
Electronic fences are core to construction IoT anti-breach and anti-tamper. This step-by-step guide shows how to draw polygon/rectangle/circle fences in the JGY platform, configure breach and tamper alerts, bind equipment, and use fences for transfer approval and rental risk control.
Read more →How to Do FOTA Remote Firmware Upgrades? Batch Update Device Firmware
FOTA (firmware over the air) lets construction T-BOXes and devices be reflashed remotely after deployment. This guide details JGY FOTA value, the upgrade flow, batch strategy, rollback and safety, and how to avoid bricking — so IoT firmware stays evergreen.
Read more →How to Use Remote Risk-Control Lock? Cut Fuel and Power on Rental Expiry
Remote lock is the core weapon of construction rental risk control. This guide details how to use JGY's risk-control lock: the hardware prerequisite (relay T-BOX), platform rule configuration (auto-lock on expiry), manual app lock, lock/unlock flows, and risk-control audit — making rental risk control real.
Read more →Selection
How Are Aerial Work Platform Rental Prices Calculated? Cost Breakdown and Quote Checklist
How is aerial work platform rental priced? This article breaks down the cost structure of scissor lift and boom lift rentals, the key factors that drive rental rates, and a quote checklist to review before you rent, helping contractors rent smarter and control total cost.
Read more →Aerial Work Platforms: Buy or Rent? A Cost, Risk, and Scenario Comparison
Scissor lifts and boom lifts are not cheap — should you buy or rent? This article compares ownership vs rental across six dimensions — purchase cost, maintenance, capital, utilization, residual value, cash flow and tax — and gives contractors and rental companies a workable decision framework.
Read more →How to Choose a CAN Bus Inclinometer? Single-Axis vs Dual-Axis
Choosing a CAN bus inclinometer starts with single- vs dual-axis. This guide compares the JGYTS-1B single-axis and JGYTS-2B dual-axis across range, accuracy, CANopen protocol, and applicable machines, helping cranes, aerial platforms, and drilling rigs pick the right sensor.
Read more →How to Choose a Construction Equipment IoT System? A Full-Stack Selection Guide
Choosing a construction equipment IoT system means evaluating terminals, connectivity, platform features, and extensibility together. This guide breaks down the four core dimensions to help OEMs and rental fleets pick the right solution in one pass.
Read more →How to Choose a T-BOX? 4G, CAN, and Relay Output Compared
T-BOX selection hinges on connectivity, CAN channel count, relay output, and extensibility. Using three JGY T-BOX models as examples, this guide compares enhanced, standard, and lite variants across 4G, CAN, relay, Bluetooth, and WiFi so you can pick the right model by use case.
Read more →Industry
How to Raise Construction Rental Fleet Utilization? A Data-Driven Look at Billable Hours, Fuel and Per-Machine Output
Whether a rental fleet makes money is hidden in the data of billable hours, fuel consumption and idle time. This article explains how construction rental fleets can use IoT data for operational analysis: how to calculate key metrics, where the data comes from, and how to raise per-machine output — helping rental companies get the numbers right and push utilization up.
Read more →How to Calculate Shift Fees in Construction Machinery Rental? IoT Auto Shift Tracking & Settlement
Shift fees built on self-reported hours and monthly reconciliation disputes are a chronic pain in construction machinery rental. This article explains how IoT auto-tracks shifts, generates billing evidence, and moves reconciliation and settlement online — so lessors and customers alike cut the guesswork and build trust.
Read more →Aerial Work Platform Rental Market Outlook 2026: Competition, Pricing & Strategy
The aerial work platform rental market keeps expanding as facade construction, factory installation and municipal maintenance grow. This article breaks down 2026 market size, competition landscape, rental pricing trends and fleet strategy to help rental companies find their edge.
Read more →Scenarios
How to Manage Electric Construction Machinery? IoT Monitoring for New-Energy Equipment
How to manage electric construction machinery? Covers the new charging, battery, and range management needs of electric machines and how IoT monitoring solves them.
Read more →Aerial Work Truck IoT: How to Digitally Manage a Rental Fleet?
Aerial work trucks (aerial machinery) rental fleets are scattered nationwide, with chronic pain points in dispatch, idle rate, contract risk control, and theft. This article breaks down how JGY combines T-BOX, a fleet distribution map, utilization rate, geofencing, and remote locking to upgrade aerial work truck rental management from guesswork to data-driven.
Read more →Arch Installer IoT: How to Trace Tunnel Support Construction Progress?
Arch installers (arch-setting jumbos) are key equipment for tunnel support installation. Support progress traceability, quality documentation, and process coordination are the hard management problems. This article breaks down the JGY solution: the T-BOX (YOOAI-GC-DT-CTF) captures conditions and positioning, uploads work records to the cloud, and the platform adds geofencing — making tunnel support progress traceable, quality documented, and processes coordinated.
Read more →Articulating Boom IoT: How to Remotely Monitor Work That Reaches Over Obstacles?
Articulating booms reach over obstacles and thrive on complex sites, pipelines, and plant maintenance — but boom dispatch, telemetry blind spots, and cross-city rental scheduling are real headaches. This article covers the JGY articulating boom IoT solution: T-BOX (YOOAI-GC-DT-CTF) CAN telemetry, 4G positioning, geofencing, and hours-based billing that make boom work visible, dispatchable, and billable.
Read more →Bulldozer IoT: How to Capture Working Conditions and Monitor Remotely
Bulldozers work year-round in harsh earthworks environments — leveling ground, pushing material, building roadbeds — where condition capture is hard and hours and location rely on operator phone reports. This guide breaks down JGY's industrial-grade bulldozer IoT solution: a wide-voltage 9–36V ruggedized T-BOX reads engine conditions via CAN, with 4G multi-constellation GNSS positioning, geofencing against boundary breaches, and automatic maintenance reminders that keep dozers manageable even in the toughest environments.
Read more →Cold Recycler IoT: How to Monitor Pavement Recycling Operations?
Cold recyclers (in-place asphalt pavement recycling) derive job quality from recycling depth, speed, milling volume, and hours, yet traditional oversight only checks results after the fact. This guide breaks down JGY's cold recycler IoT solution: T-BOX captures CAN condition, combined with recycling depth, speed, positioning, and operation reports — so recycling quality and cost are visible during the process and traceable in the result.
Read more →